PS75SS

The PS75SS heavy-duty, non-corrosive, PVC float valve is a standard mount unit with a .48” orifice. Use with a 12” x 1/4” stainless steel rod and 6” float.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PS75SS

PS75SS

PT75SS

The PT75SS heavy-duty, non-corrosive, PVC float valve is a tank (bulkhead) mount unit with a .48" orifice.  Use with a 12" x 1/4" stainless steel rod and 6" float ball.  It has extended threads on the inlet side of the valve for mounting through a tank wall and comes complete with sealing washer and jam nut.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber seals

PT75SS

PT75SS

PS75LS

The PS75LS heavy-duty, non-corrosive, PVC float valve is a standard mount unit with a .30” orifice. Use with a 12” x 1/4” stainless steel rod and 4” x 5” float. When using less than maximum pressure the size of the rod may be reduced.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PS75LS

PT75LS

The PT75LS heavy-duty, non-corrosive, PVC float valve is a tank (bulkhead) mount unit with a .30” orifice. Use with a 12” x 1/4” stainless steel rod and 4” x 5” float. When using less than maximum pressure the size of the rod may be reduced. It has extended threads on the inlet side of the valve for mounting through a tank wall and comes complete with sealing washer and jam nut.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PT75LS

PT75LS

PX75SS

The PX75SS heavy-duty, non-corrosive, PVC float valve is a standard mount unit with an extended inlet. It has a .48” orifice. Use with a 12” x 1/4” stainless steel rod and 6” float.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PX75SS