PS3838187, PS383825, & PS3838312

PS3838187, PS383825 & PS3838312 heavy-duty, non-corrosive, PVC float valves are available with .187”, .25”, and .312” orifice sizes to match required flow ranges. They are standard mount with a 3/8” pipe thread inlet and outlet. Use with 3” or 6” rods and 4”x 5” or 2”x 2”x 4” floats.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PS3838187, PS383825, & PS3838312

PS3838187, PS383825, & PS3838312

PT3838187, PT383825, & PT3838312

PT3838187, PT383825 & PT3838312 heavy-duty, non-corrosive, PVC float valves are available with .187”, .25” and .312” orifice sizes to match required flow ranges. They are tank (bulkhead) mount with a 3/8” pipe thread inlet and outlet and extended threads on the inlet side of the valve for mounting through a tank wall. Valves come complete with sealing washer and jam nut. Use with 3” or 6” rods and 4” x 5” or 2” x 2” x 4” floats.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PT3838187, PT383825, & PT3838312

PT3838187, PT383825, & PT3838312

PS0505187, PS050525, & PS0505312

PS0505187, PS050525 & PS0505312 heavy-duty, non-corrosive, PVC float valves are available with .187”, .25” and .312” orifice sizes to match required flow ranges. They are standard mount with a 1/2” pipe thread inlet and outlet. Use with 3” or 6” rods and 4” x 5” or 2” x 2” x 4” floats.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PS0505187, PS050525, & PS0505312

PS0505187, PS050525, & PS0505312

PT0505187, PT3050525, & PT0505312

PT0505187, PT050525 & PT0505312 heavy-duty, non-corrosive, PVC float valves are available with .187”, .25” and .312” orifice sizes to match required flow ranges. They are tank (bulkhead) mount with a 1/2” pipe thread inlet and outlet and extended threads on the inlet side of the valve for mounting through a tank wall. Valves come complete with sealing washer and jam nut. Use with 3” or 6” rods and 4” x 5” or 2” x 2” x 4” floats.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PT0505187, PT3050525, & PT0505312

PT0505187, PT3050525, & PT0505312

PS75SS

The PS75SS heavy-duty, non-corrosive, PVC float valve is a standard mount unit with a .48” orifice. Use with a 12” x 1/4” stainless steel rod and 6” float.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PS75SS

PS75SS

PT75SS

The PT75SS heavy-duty, non-corrosive, PVC float valve is a tank (bulkhead) mount unit with a .48" orifice.  Use with a 12" x 1/4" stainless steel rod and 6" float ball.  It has extended threads on the inlet side of the valve for mounting through a tank wall and comes complete with sealing washer and jam nut.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber seals

PT75SS

PT75SS

PS75LS

The PS75LS heavy-duty, non-corrosive, PVC float valve is a standard mount unit with a .30” orifice. Use with a 12” x 1/4” stainless steel rod and 4” x 5” float. When using less than maximum pressure the size of the rod may be reduced.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PS75LS

PT75LS

The PT75LS heavy-duty, non-corrosive, PVC float valve is a tank (bulkhead) mount unit with a .30” orifice. Use with a 12” x 1/4” stainless steel rod and 4” x 5” float. When using less than maximum pressure the size of the rod may be reduced. It has extended threads on the inlet side of the valve for mounting through a tank wall and comes complete with sealing washer and jam nut.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PT75LS

PT75LS

PX75SS

The PX75SS heavy-duty, non-corrosive, PVC float valve is a standard mount unit with an extended inlet. It has a .48” orifice. Use with a 12” x 1/4” stainless steel rod and 6” float.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PX75SS

PS100SS

The PS100SS heavy-duty, non-corrosive, PVC float valve is a standard mount unit with a .69” orifice. Use with a 12” x 1/4” stainless steel rod and 6” or 8” float ball. Lever brackets on both sides of the valve allow it to be used upside-down. Two fulcrum positions on the lever add further flexibility to accommodate different pressures and flow rates.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PS100SS

PS100SS

PT100SS

The PT100SS heavy-duty, non-corrosive, PVC float valve is a tank (bulkhead) mount unit with a .69” orifice. Use with a 12” x 1/4” stainless steel rod and 6” or 8” float ball. Lever brackets on both sides of the valve allow it to be used upside-down. Two fulcrum positions on the lever add further flexibility to accommodate different pressures and flow rates. There are extended threads on
the inlet side of the valve for mounting through a tank wall and it comes complete with sealing washer and jam nut.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PT100SS

PT100SS

PT100LS

The PT100LS heavy-duty, non-corrosive, PVC float valve is a tank (bulkhead) mount unit with a .38” orifice. Use with a 12” x 1/4” stainless steel rod and 6” or 8” float ball. Lever brackets on both sides of the valve allow it to be used upside-down. Two fulcrum positions on the lever add further flexibility to accommodate different pressures and flow rates. There are extended threads on
the inlet side of the valve for mounting through a tank wall and it comes complete with sealing washer and jam nut.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PS125SS

The PS125SS heavy-duty, non-corrosive, PVC float valve is a standard mount unit with a 1.0” orifice. Use with a 5/16” threaded stainless steel rod 14”, 16” or 18” in length and an 8” float ball. Lever brackets on both sides of the valve allow it to be used upside-down. Two fulcrum positions on the lever add further flexibility to accommodate different pressures and flow rates.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PS125SS

PS125SS

PS150SS

The PS150SS heavy-duty, non-corrosive, PVC float valve is a standard mount unit with a 1.0” orifice. Use with a 5/16” threaded stainless steel rod 14”, 16” or 18” in length and an 8” float ball. Lever brackets on both sides of the valve allow it to be used upside-down. Two fulcrum positions on the lever add further flexibility to accommodate different pressures and flow rates.

Construction: NSF approved PVC, 18-8 stainless steel hardware, Santoprene® rubber replaceable seals

PS150SS

PS150SS